Armor Rods/Formed Wire Accessories manufacture introduction,Aluminium Alloy Helical Armor Rods supplier

 Click here for Price inquiry, Contact Supplier Artisan Industry

Welcome add our WhatsApp for Factory Online Video Tour, +86 150 5061 5346

Armor Rods/Formed Wire Accessories/Preformed Line Products/Helical Fittings

 Conductor Aluminum Alloy Armor Rods  technical introduction:

Armor rods are designed to protect the conductor by reducing bending, compression, and abrasion at the support point. Protection against flashover damage is also provided. Armor rods are recommended as protection for spans greater than 300 ft. (91 m). Manufactured from either aluminum alloy, or galvanized steel, they are designed for use

with ACSR, AAC, AAAC, ACSS, SSAC, TW Types and ACAR conductors as well as Alumoweld® and steel ground wire. All rod sets are manufactured with right-hand lay as standard for aluminum-based material and left hand lay for Alumoweld and steel ground wire.

Features

Color Coded and Center Marked

For ease of identification to conductor size, the armor rods are color coded in the center of the rod. This feature also assists in alignment of the rods during installation.

Repair Damage

When no more than 50% of the outside strands on an ACSR or aluminum conductor have been damaged outside the support point, armor rods may be used to restore 100% of the rated conductance and strength of the line.

Vibration Protection

Installing armor rods improves the conductor's ability to withstand the fatigue forces associated with aeolian type vibration. They do not function as vibration control devices. 

Tap Over

Armor rods may be tapped over on ACSR and aluminum conductor, but not on Alumoweld, or steel ground wire. Where tapping is used, it is strongly recommended that the conductor is thoroughly wire brushed and an oxide inhibitor be applied.

Extra High Voltage Applications

For 345 kV and above, the armor rod ends are modified to eliminate Corona effects and include a suffix of 'EHV' at the end of the part number.

Artisan Industry Company Website: https://www.artisanmake.com/preformed-armor-rods-machines

Preformed Line Fittings Factory Price inquiry: info@artisanmake.com

Tel/WhatsApp: +86 150 5061 5346

Preformed Reinforcing Armor Rods 

Preformed splice / Preformed Grip for guy wire or other cable.

Table Selection of Preformed Armor Rods for ACSR

Remark: Material of Preformed Armor Rods for ACSR is aluminum alloy wire;

Use and structure:

The preformed armor rods are used to keep the conductor from the vibration, clamp compressive stress, friction and abrasion, electric arc and other damages. The structure of the preformed armor rods andpreformed short armor rods is simple and a set of preformed rods become an empty pipe and enlace, holdand protect the conductor.

The product is suitable for the standard preformed rods for ACSR; It alwaysinstalled in the ship-type suspension clamp and support insulators. And it will not be used in splice or repairsleeve.

Trait:

1)The preformed rods holding the conductor tightly, avoid slip of conductor, and so that minimized theabrasion of conductor.

2)Due to the grip flexibility of preformed rods, it will keep the conductor from loosen.

3)The raw material have been sealed with stainless, so that to keep excellent corrosion resistance.

4) Installed by hand directly, no need special tool.

5)Easy to guarantee the quality of installation, checked by optic view without special training.

6) The preformed rods is a very common fitting, it can be matched with different clamps.

  Click here for Price inquiry, Contact Supplier Artisan Industry

Welcome add our WhatsApp for Factory Online Video Tour, +86 150 5061 5346