Heliformed repair rod supplier,Helical Armor rods manufacturer,Heliformed Fittings factory price

Heliformed repair rod Sub-Sets:Individual rods assembled into groups of two,three ,or four.

And the products surface was Sand Blasting Surface Treatment.Core Splice:Galvanized steel,sub-setted and gritted.Need Sand Blasting Surface Treatment.Filler Rods:Aluminum alloy,sub-setted,or single rods,not gritted.

Filler Rods are not required for selected sizes corresponding to tabular information on catalog pages.

Outer Splice:Aluminum alloy,sub-setted and gritted.Need Sand Blasting Surface Treatment.

Center Mark and Color Code:Establishes recommended alignment of rods during application and Assist in identification of conductor size

Length:corresponding to tabular information appearing on catalog pages.

Identification Tape:Shows catalog number,nominal sizes.

preformed dead end termination manufacturer

Heliformed Damper

Damping devices are designed for the single purpose of reducing vibration.This single function is entirely different from that of protecting against (1)stress concentrat ions,(2)fretting or abrasion,and(3)arc-over burning.Because of this,damping devices should be considered only as supplemental to Armor Rod or other hardware at tangent supports.Dampers are also used as supplemental protection at dead-ents.The degree of protection needed on a specific line depends upon a number of factors such as line design, temperature,tension,exposure to wind flow,and vibration history on similar construction in the same area.MATERIAL:The solid polyvinyl chloride helical rod material.